Electrode is a part of the set designed to actively neutralize excessive electrostatic charges that are created on processed materials.
      It is designed to cooperate with high voltage power supply TZWN-05.
When high voltage is applied, strong electric field is created near the points of electrode. It causes intensive ionization of air molecules (disintegration to positive and negative ions). The charged material near the electrode attracts appropriate ions (of opposite electric polarity) under the influence of electrostatic forces, which neutralizes its charge.

                        

Electrodes are manufactured on an individual order.
Available usable length range of electrodes is 100mm - 1900mm.

How to order:
           Pointed electrode JO96/1/L
                                                         JO96 - model
                                                         /1     - one connection terminal
                                                         /L      - electrode's usable length [mm]

Note!
The electrode's length together with the connection is about 50mm longer than the usable length of electrode.

      Electrodes JO96/1/L of a total usable length of not more than 2600mm (with high voltage cable not longer than 1,5m) can be connected to one TZWN-05 power unit.
      Electrode JO96/1/L is equipped with single high voltage connection terminal. That allows not more than two electrodes JO96/1/L being directly connected to the TZWN-05 power supply. If more electrodes are necessary, transitional electrodes JO96/2/L should be applied.

      In neutralization of discontinuous materials (fabric, yarn, fibers...) one electrode can be used. For continuous (foil, coated paper) the use of two electrodes, one on each side of the film (sheet) is recommended. In this case planes of symmetry of electrodes should be displaced for at least 50 mm. To ensure maximum efficiency of operation, there should not be any metal elements at a distance of 50mm from the electrode.

  

      Electrode should be mounted at a distance of 3-20mm from the moving material (usually around 5mm).
Electrode of the neutralizer should be placed directly in front of the place, where the electrostatic charge is to be removed.

Note!
Many factors (friction, pressure, temperature...) can cause electrostatic charge to be generated once again and accumulate on the material!

Rated data

• type ...................................................................... JO96/1/L
• compatible item ........................................................ power unit TZWN-05
• supply voltage ........................................................... 7kVac, 1,2kHz
• length of a single electrode ........................................... 100 - 1900 mm
• maximum total usable length of electrodes ........................ 2600 mm
• recommended total usable length of electrodes .................. < 2000 mm
• installation distance .................................................... 3 - 20 mm
• maximum number of electrodes for one power supply ........... 2
• operation mode ......................................................... continuous
• dimensions: length x width x height ................................. 23 x 23 x (L+50) mm
• weight ..................................................................... 0,65 kg/m

      Correctness of the electrode's operation can be checked by bringing a neon lamp placed on an insulating bar near to the electrode's points. The electric field around the needles should make the lamp glow. In a dark area blue fireflies of corona discharges should be visible on the tips of the needles.